Are you thinking about hardwood floor in bathroom? Then you can read the entire article.
Wood can be used as a floor in the bathroom, where there is always a humid environment! Most homeowners don’t want to believe this, but wood floors are beautiful, versatile, and long-lasting if properly maintained.
We’ve covered what types of wood floors work best here, and we’ve provided some beautiful and amazing wood flooring designs for bathrooms. Caring for wooden floors in the bathroom is a bit more challenging than other floor.
If you are using wood flooring in your home bathroom, the information below will explain everything you need to know.
Materials Needed for Hardwood Floor Installation
1. Various Hardwood Flooring:
There are several options you can use to choose hardwood flooring for a bathroom. Like hardwood or you can choose bamboo flooring.
Solid hardwood is made from a single piece of wood and provides an authentic look.
Engineered hardwood floors on the other hand with hardwood veneers are durable and moisture resistant. It can be a good choice for bathroom installation.
2. Use of Underlayment Materials:
Underlayment is a very good material for installing hardwood floors. It provides a flat surface on the wood, helping to prevent moisture and reduce noise.
Underlayments are used to protect floors from water damage and to provide moisture-proofing. Some of the underlayment names are rubber underlayment, cork underlayment, foam underlayment, etc.
3. Necessary Tools:
Here are the tools needed to install wood flooring in the bathroom
- Circular saw
- Pneumatic nail gun
- Measuring tape
- A chalk
- A pre bar
- Trowel (adhesive application)
You should use safety glasses and knee pads to keep yourself safe during all of these installations.
Hardwood Flooring Installation
1. Keeping Hardwood on the Floor
First, all the wood should be stacked in one place in the bathroom. Measure the space between the two side walls of the bathroom and start lining up the wood accordingly.
Of course, when placing two pieces of wood in a row, leave a little space in between. For a stable installation mark all those wooden boards with nails and use a tapping block or mallet to prevent gaps in between.
2. Spacing and Alignment
Proper spacing and alignment are critical to professional hardwood installation. A small gap between the floor and the wall is necessary, usually about half an inch, so that the wood expands and contracts properly at different times.
When the cards are fitted to the floor in succession, care must be taken to ensure that the wooden boards are straight and parallel to the wall. Aligning the timbers in this way to fit the floor creates a floor that is structurally strong and visually appealing.
3. Seal Corners and Edges
The wood used for beautiful hardwood flooring adds beauty to the flooring if the edges and edges are cut nicely. Care should be taken to ensure that the saw used to cut the cuts smoothly.
Finally, remove any wood trim pieces from the ends of the wall or the middle of the two wood joints and carefully re-install them with the right wood.
Sealed Hardwood Floor in Bathroom
1. Sealing the Bathroom Floor
To protect hardwood floors in bathrooms from moisture, you need to seal hardwood floors. If the bathroom is in a high-humidity environment, swelling or blisters may occur.
Sealing creates a barrier and prevents water from seeping into the wood. Sealing increases the durability of hardwood and resists scratches and stains.
2. Choosing the Right Sealer
Many types of sealers are available in the market for bathroom hardwood floors so you can choose the right sealer. Water-based sealers are a popular choice because they have a low VOC content and dry very quickly.
Another popular sealer is polyurethane sealer which is durable and has excellent water resistance. When choosing a bathroom hardwood floor sealer, consider durability and maintenance requirements.
3. How to Apply Sealer to Hardwood Floors
The hardwood floor must be clean before you apply the sealer. Begin by stirring the sealer thoroughly to apply the sealer evenly. Use a clean brush or clean roller to apply the sealer.
It is important that the sealer is completely dry before you apply additional coats and that you can apply multiple coats to achieve a durable finish.
How to Prevent Hardwood Flooring Damage?
If you have installed hardwood floors in your bathroom, there are some steps you should follow to preserve and protect these floors.
Since the bathroom floor is often exposed to moisture and water, you need to take care to minimize damage or prolong the life of the wood floor.
Below we have discussed in detail some of the main aspects of how you can save your floor from various damages.
1. Regular Maintenance
You should recheck the floor finish every few months. When two planks are nailed together in the floor, small holes or holes in the floor can allow water to seep in and damage the floor, so check for water seeping through those holes.
If you notice any cracks forming in your floor then you need to quickly apply wood filler. You need to regularly check that water does not accumulate on any part of the floor for too long.
2. Bath Mats
If bath mats can be used on wooden floors, the protection of the floor is increased a little. These baths are especially effective when used against a tub or shower.
When water drops from the tub or shower splash onto the floor, damage can occur to the wood above the floor. Therefore, using bath mats can protect hardwood floors from spills or water.
3. Avoiding False Ceiling
Properly sealing hardwood floors in the bathroom is important to protect against moisture. A critical mistake is using the wrong type of sealer or applying insufficient coats.
A sealer not designed for bathroom use may lead to insufficient water resistance if you use one. Be sure to follow the manufacturer’s instructions for choosing and protecting the right sealer for the bathroom.
4. Install Tub and Shower
The distance of the tub or shower from the floor is a little higher, so the contact of water with the floor is less. But you must take care that the water from the place where the tab or shower is installed on the wall does not fall on the floor.
5. Maintain Plumbing
The pipes that flow in and out of major bathroom fixtures can sometimes leak. Make sure that all the pipes coming into the bathroom are thoroughly sealed.
The edge of the bathroom wall where the water comes out through the pipes or drains must be inspected.
6. Avoid Subfloor Preparation
Avoiding subfloor preparation is a big mistake. Subfloor preparation is very important when it comes to hardwood floors.
If you skip this, you could have problems down the road. A moisture problem can cause unevenness in hardwood, mold, mildew, etc.
Advantages of Hardwood in a Bathroom
We will discuss the Advantages of hardwood flooring in the bathroom:
1. Cozy Comfort
In the winter, hardwood floors stay warmer than other floor surfaces like ceramic or tiles. So they are much more comfortable.
2. Elegance
Hardwood floors look much better than other types of flooring. It is good for cutting designs.
3. Durability & Renewal
Hardwood floors are very durable if properly maintained (about 25 years or more) These floors are very tough. When the floors are not scratched they can be refinished or renewed anytime.
Disadvantages of Hardwood Floor In Bathroom
The problems affecting a bathroom’s hardwood flooring involve how moisture can affect the material.
1. Scattered Pieces
After the wood floor is installed, spills should be removed or removed, although they do protect the finishing wood from water to some extent.
If they sit on the wood for a long time, it corrodes the wood material and contributes to the accumulation of moisture.
2. Hardwood Floor Slope
When you install hardwood floors in the bathroom, be careful not to make the floor completely flat or you will have problems with water running down to low areas.
In that case, so that water does not accumulate in one place for a long time, the floor has to be slightly sloped to eliminate these problems. So that the water can get out easily from that side.
3. Continue Water Contact
Bathroom floors will always be flooded with water. No wonder for that. But in that case, it will not be easy to repair the floor damaged by water flood. Unless the hardwood floor is properly sealed.
4. Stain On the Bathroom Floor
A variety of chemicals such as soaps, cleansers, shampoos, and body products are used in the bathroom. These include products that contain acids that can cause a permanent stain on a wood floor if spilled onto the wood.
Final Thoughts
Installing wood flooring in a bathroom is not impossible, but with some careful planning and choosing the right wood species and installing it properly, it provides a luxurious home experience.
Wood floors require a little more maintenance than other floors. We have mentioned all the above points as suggested by flooring experts which will help you to make your choice of wooden flooring among the best options for bathroom flooring.
Frequently Asked Questions
1. Is Hardwood flooring good for bathrooms?
Ans. Totally depends on you because if you can’t guide it properly it can get damaged due to high humidity or water splashing in it. One good thing about it is that it stays warmer in winter so it is very comfortable.
2. Are Bathroom Hardwood Floors Water-resistant?
Ans. The answer is no, it is not naturally waterproof. Hardwood can absorb moisture.
3. How to Protect Hardwood Floors from Water?
Ans. One way to remove water from hardwood floors is to seal them. It can protect against water penetration.
4. Differentiate between Wood Floor vs Concrete Floor.
Ans. Concrete floors are durable and less prone to damage. It is cold during winter which is not comfortable. Wooden floors are warm in winter and one of the advantages of this is that they are comfortable because they are warm. It has the potential for damage.
5. How Durable is Hardwood?
Ans. Hardwood lasts longer than other flooring materials. Carpet flooring (around 5-15 years) Laminate flooring (around 10-30 years).
You Can See Also,