Do you have moisture problems on your bathroom walls? Because bathroom walls are constantly exposed to water and moisture.
Due to this, bathrooms present unique painting challenges. The right paint can prevent mold growth, prevent water damage, and maintain a new look for years.
When it’s time to paint a bathroom, choosing the best paint for the room is one of the most important decisions, along with choosing the wall color.
Keep reading this article to learn more about moisture resistant bathroom paint and how to choose the best one!
Factors Considering to Buy Bathroom Paint
Paint Colour
Bathrooms are usually a bit smaller than other rooms. White color is used in most bathroom paintings. Alternatively, you can use other colors for painting the bathroom
Wipe Ability
Bathroom walls are usually hydrated or have a high moisture content. In that case, this moisture should be removed and paint should be used. By using different types of shampoos or cleaning agents, it is easy to paint.
Drying time
Paints available in the market have different drying times. Most paint colors usually take less than four hours to dry completely.
Wall Surfaces
Before painting, you must check the type of paint to choose the right one based on the surface to be painted on.
Our Top 7 Picks: Best on the market
After much searching, we have brought you some of the best paintings in the market. Below are the best products in the market and various discussions about them.
1. THE ONE Paint & Primer
Paint Specifications:
Brand Name | THE ONE |
Color | Black |
Finish Type | Matte |
Size | 8.45 Fl Oz (Pack of 1) |
Item Volume | 250 Milliliters |
Special Feature | Non-Toxic, Fast Drying, Washable |
Reasons to buy the Products:
- Durabilidad duradera.
- No requiere trabajo de preparación para la madera.
- Apto para proyectos de pintura interior y exterior.
- Elija entre los 12 colores impresionantes disponibles en acabados brillante, satinado y mate.
- No tóxico, a base de agua, de bajo olor, con VOC ultrabajo.
2. Rust-Oleum Zinsser
Paint Specifications:
Brand Name | Rust-Oleum |
Color | White |
Finish Type | Matte |
Size | 32 Fl Oz (Pack of 1) |
Item Volume | 946.35 Milliliters |
Special Feature | mold-killing |
Reasons to buy the Products:
- Water-based coating is easy to clean with soap and water.
- Covers up to 160 sq. ft.
- Works with any topcoat.
- Ideal for use with ZINSSER perma-white.
- Bonds chalk coatings, masonry and metal.
3. INSL-X Stix Waterborne Bonding Primer
Paint Specifications:
Brand Name | DAWINSIE |
Color | White |
Finish Type | Flat |
Size | 32 Fl Oz (Pack of 1) |
Item Volume | 0.25 Gallons |
Special Feature | Fast-Drying, Low VOC |
Reasons to buy the Products:
- Bonds to “hard to coat” surfaces and can be topcoated with almost any product.
- Fully cures at temperatures up to 35°F.
- 75-100 sq. ft. coverage for interior or exterior use.
- Low VOC and easy cleanup with soap and water.
- Excellent enamel retention, providing an excellent base for a uniform topcoat finish.
4. NADAMOO Tub and Tile Refinishing Kit
Paint Specifications:
Brand Name | NADAMOO |
Color | White |
Finish Type | Matte |
Size | 105 Fl Oz (Pack of 1) |
Item Volume | 0.7 Fluid Ounces |
Special Feature | Odor Blocking |
Reasons to buy the Products:
- NADAMOO Refinishing Kit is meet your expectations.
- This is ideal for refinishing countertops, bathtubs, tiles, sinks, and toilets.
- It works on all types of bathroom surfaces including ceramic, acrylic, fiberglass, porcelain, and enamel.
- All the elements allow you to bring your projects to life without unnecessary stress!
- The kit has everything you need to refinish your bathtub and tiles painting.
5. Majic Paints Interior/Exterior Satin Paint
Paint Specifications:
Brand Name | Majic Paints |
Color | Black |
Finish Type | Satin |
Size | 32 Fl Oz (Pack of 1) |
Item Volume | 32 Fluid Ounces |
Reasons to buy the Products:
- Perfect for any repurposing project.
- Works indoors and outdoors.
- Excellent color retention.
- Levels to a smooth, beautiful finish.
- Adheres to almost any surface.
- No sanding or priming is required.
- Available in 10 unique colors.
6. Tub and Tile Paint Refinishing Kit
Paint Specifications:
Brand Name | Mialife |
Color | White |
Finish Type | Matte |
Size | 9 Fl Oz (Pack of 2) |
Item Volume | 18 Fluid Ounces |
Special Feature | Semi-Gloss |
Reasons to buy the Products:
- Long service time.
- Friendly and safe.
- High heat resistance.
- Save time and money.
- Clean as new.
- easy to operate.
7. DWIL Tub Paint
Paint Specifications:
Brand Name | DWIL |
Color | Vanilla White(A little yellowish than white) |
Finish Type | Semi-Gloss |
Size | 1.94 Ounce (Pack of 9) |
Item Volume | 17 Fluid Ounces |
Special Feature | Low odor, Waterproof, Semi-Gloss finish, High adhesion, Scratch resistant, Easy to clean |
Reasons to buy the Products:
- They provide a complete set of painting construction tools.
- DWIL tile paint is suitable for all types of bathroom tiles.
- This paint should not be used on the bottom of the metal, marble, and peeling surfaces.
- DWIL barrel paint are formulated with acrylic resin, high adhesion, and no peeling.
- The surface is not easy to scratch.
- DWIL paint is a water-based paint with low odor and low VOC.
Preparing To Paint a Bathroom
Proper preparation will make the project go smoothly.
Remove fixtures
Remove as many bathroom fixtures as possible before you begin painting, such as towel racks, mirrors, outlet covers, or any other decorative items you don’t want to paint.
Store the hardware associated with each piece in labeled bags to make reassembling them easier. Use a caulk compound to plug holes in the walls.
Clean bathroom surfaces
Clean the bathroom thoroughly after removing all the appropriate fixtures. Wipe down the walls, ceilings, floors, and trim, removing all traces of dirt, soap scum, and mold.
Pay special attention to the areas around the shower or tub, as mold tends to form there. Using a degreaser is a good idea, especially if it’s been a while since your last deep clean. Dry all surfaces thoroughly before you proceed.
Repairing Damage
When preparing the bathroom for painting you may need to cover some holes with a spackle or spackling compound. Let the spots dry completely before you smooth them out.
Textured surfaces may require special techniques. If your bathroom has textured surfaces or unsure how to prepare a certain area, contact a home improvement professional.
Masking and Priming
Before painting a bathroom, the final step is to mask and prime the space. Carefully apply painter’s tape to any outlets or areas that need protection and place drop cloths all over the bathroom floor.
Primer provides a smoother surface for painting and helps the paint last longer. If you use primer, follow the directions on the product label and allow it to dry completely after applying it. Some primers require multiple coats while other primers only require one.
Bathroom Painting Tools
There are several tools you should require for the particular interior or exterior design. Make sure you have the tools listed below before you start bathroom paint.
Equipment / Tools | Uses |
Brushes | for painting walls, trim, and other surfaces. |
Cleaning Spray, sponges | for cleaning. |
Drop cloths | to protect the walls where not necessary to paint. |
Paint trays | holding the paint color. |
Painter’s tape | the area that needs protection from paint. |
Rollers Cover | used for large spaces. |
Sandpaper | used on smooth and prep surfaces. |
Spackling compound | use to fill or repair damage in plaster. |
Painting Bathroom Wall and Ceiling
Paint Your Bathroom Well With Good Painting Here are a few tips on how to paint your bathroom:
1. Cut into:
As you cut into the painting, include your ceiling and wall outline before you start painting the rest of the wall or before you start painting the clean edges of the trim. You can use an angled brush to paint about 2-4 inches around edges, corners, and fixtures.
2. Rolling on the paint:
You can paint the walls faster if you use a paint roller. You dip your roller halfway into the paint tray and roll once to remove excess paint. For best and even coverage you paint well on the wall in overlapping W-shaped strokes and be careful not to spill the paint on the floor.
3. Ceiling Painting:
Painting a ceiling is difficult but painting a ceiling is not impossible. Use drop cloths to keep your floors looking good. Then you start painting with a small step ladder. Use a hat to prevent the paint from falling into the hair.
4. Apply a second coat:
4. Apply second coat: Most paint jobs use two coats of paint for full coverage. Let the first coat dry thoroughly before you apply the second coat to your bathroom. The first crore may take about four hours. You can use a fan.
Painting Bathroom Door
You design your bathroom door beautifully. The better you design your bathroom, the better your bathroom will look.
1. Preparing and painting the door:
To make painting the door easier, if possible, remove the door from the hinges. You should lightly sand the surface of the door to create a smooth base for the beautiful paint.
Use a high-quality paintbrush or foam roller to apply the paint evenly, but fix any drips before drying. Dry the door thoroughly to avoid dampness before you attach the hardware.
2. Design:
Design can change the look of your bathroom. So you design your bathroom door in such a way that it looks like a new bathroom at some point.
Costs of Painting a Bathroom
No matter what image you have in mind if you want to change the image from one situation to another, it can cost anywhere from $150 to $350. However, we have discussed some things below for you.
1. Cost of Paint:
The cost of a gallon of paint for your bathroom ceiling might range from $25 to $65.
You can paint about 380-400 square feet of ceiling in your bathroom with one coat of paint. Therefore, you will use slightly less than one gallon if your ceiling is 12 x 12 feet. However, this number increases by 50% if you are applying two coats.
Approximately $20 will also be spent on a gallon of priming that will be applied before painting.
2. Cost of Painting Popcorn Ceiling:
If your ceiling has a popcorn texture, you may spend a little more money painting it because the paint is better. You’ll see ceilings around $1 to $3 per square foot because you need a good paint job.
3. Other Costs:
Before you paint your bathroom ceiling to get rid of things like ceiling mold in the bathroom or to keep it clean you will need the following various perfect things. Below are the things:
- Baking soda
- vinegar
- hydrogen peroxide
But you will need paint brushes and paint rollers (these are about $10 to $20 depending on the quality). And ladders are needed for bathroom ceilings – if ladders aren’t there then around $50 to $100 for new ladders – again depending on quality. So, you have to count these expenses.
Pro Tips to Paint a Bathroom
Play with colors:
Think about the bathroom vanity and need a nice fresh color. For the bathroom next to your bedroom, choose a color that goes well with the bedroom’s paint color. And if white is your favorite color, you choose the right white paint.
Choose the right finish:
It is more durable than satin eggshell and ideal for your bathroom. It’s also easy to clean so you can use it on your walls, ceiling, and even trim. Many satin finishes are harder than before. A satin gloss draws attention to any wall imperfections so be sure to prepare the walls as smooth as possible.
Wash the walls first:
New paint will need a clean dry surface to work on. The existing rash may prevent the paint from adhering properly. Remove stains with a sponge dipped in a solution of one part bleach and three parts water.
You need to ventilate the bathroom while you clean the bathroom, so keep a bathroom window open or run an exhaust fan. You wipe the surface of the bathroom with clean water and dry the bathroom thoroughly before painting.
Then dry the painting well because light water or anything can ruin the painting so dry your bathroom well.
Final Thoughts
When painting a bathroom, we recommend using moisture resistant paints with a gloss or semi-gloss finish, a Satin finish, an Eggshell finish, or an acrylic or latex base.
Make sure you select the best paint colors and tools for your project. Select colors to create the ambiance you desire while maximizing the perceived space in your bathroom.
Keep in mind bathroom paint proper preparation and application are just as important as paint selection. Our guide outlines ensure exactly how to carry out a bathroom paint job from start to finish.
Frequently Asked Questions
1. Waterproof paint for a bathroom?
High-gloss acrylic-latex paints or oil-based paints are known as waterproof paints.The higher the amount of gloss in a paint, the tighter its molecular structure. This means it has a better chance of resisting water than flatter paint. Therefore, semi-gloss or satin-gloss paints can be chosen as waterproof paints over flat or matte paints.
2. Do you need to prime the bathroom before painting the bathroom?
Many bathroom paints include a primer, so a product seems necessary. However, separate antibacterial and mold-resistant primers are also now available in the market.
3. Will moisture-resistant paint always be needed for the bathroom?
Having moisture resistant curry paint for the bathroom isn’t essential, but it’s a good idea. But matte, eggshell, and flat finishes fall into soft colors. So this means high humidity levels and mildew can be the main cause of their destruction.
4. How expensive can water-resistant bathroom paint be?
The cost of water-resistant paints depends entirely on you. While latex paint is usually a cheaper alternative to paints, acrylic can be a little more expensive. Some paints can be as little as $20 per gallon, and there are paints that are over $50.
5. How durable is water-resistant paint?
As a general metric, water-resistant paints last about 6-9 years on your walls. But sometimes time paints can last much longer. The quality and type of paint is a major factor that determines its longevity. However, acrylic paint is more durable than latex, so the durability is greater.